Product ID:ODORLESS, ALKYD, INT. FLAT, P-30
MSDS Date:10/30/1990
FSC:8010
NIIN:00-664-7091
MSDS Number: BJQVB

BAKER SEALANTS & COATINGS COMPANY, INC.

234 SUYDAM AVENUE
JERSEY CITY, NJ 07304
US

Emergency Phone: 201-333-6986

Info Phone: 800-356-3129

Preparer: CHARLES FRIEDMAN

Cage: FO833

STEVEN INDUSTRIES

8 BAYONNE, NJ 07002-3417 US

Telephone: 201-437-6501

Cage: 33150

TITANIUM DIOXIDE

CAS: 1317-80-2

RTECS: VM2940000

Fraction By Weight: 17.3%

SILICA, CRYSTALLINE - QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 32.2%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

LINSEED OIL

CAS: 8001-26-1

RTECS: OI9690000

Fraction By Weight: 16.3%

ALKYD RESIN

CAS: 66070-60-8

Fraction By Weight: 16.6%

STODDARD SOLVENT

CAS: 8052-41-3

RTECS: WJ8925000

Fraction By Weight: 15.0%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM; 9293

270

RTECS: 9999999VO

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: VAPORS/MIST CAUSES STINGING,
TEARING, REDNESS. SKIN:PROLONGED/REPEATED CONTACT CAUSES REDNESS,
BURNING, DRYING, CRACKING. INHALATION: IRRITATION-NOSE, THROAT &
SIGNS OF NERVOUS SYSTEM DEPRESSION . INGESTION:
IRRITATION-DIGESTIVE TRACT& SIGNS OF NERVOUS SYSTEM DEPRESSION.
ASPIRATION HAZARD-INFLAMMATION & DAMAGE.
Effects of Overexposure:NERVOUS SYSTEM DEPRESSION: DROWSINESS,
DIZZINESS, LOSS OF COORDINATION AND FATIGUE.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN AND LUNG
DISORDERS (EG; ASTHMA-LIKE CONDITIONS).

First Aid:EYES: FLUSH W/WATER-15 MIN. SKIN: REMOVE CONTAM CLOTHES. WASH
W/MILD SOAP & WATER. PERSIST IRRIT-MEDICAL AID. INHALE: VICTIM TO
FRESH AIR. CPR IF VICTIM NOT BREATHING. OXYGEN BY QUALIFIED AID.
IMMEDIA TE MEDICAL ATTN. INGEST: AVOID ASPIRATION-DO NOT INDUCE
VOMIT OR GIVE ANYTHING BY MOUTH/SEVERE LUNG DAMAGE. GET MED AID.
DROWSINESS-VICTIM PLACED ON LEFT W/HEAD DOWN, NOT LEFT ALONE. SEEK
MED AID.

Flash Point Method:TCC
Flash Point:107F,42C
Lower Limits:0.8
Upper Limits:5.0
Extinguishing Media:DRY CHEMICAL, CO2 OR FOAM.
Fire Fighting Procedures:USE SCBA FOR FIRE FIGHTERS. WATER SPRAY IS
USEFUL IN MINIMIZING VAPORS & COOLING CONTAINERS EXPOSED TO HEAT &
FLAME. DO NOT SPREAD BURNING LIQUID WITH WATER.
Unusual Fire/Explosion Hazard:THIS MATERIAL IS COMBUSTIBLE AND MAY BE
IGNITED BY HEAT OR FLAME. THIS MATERIAL WILL BURN, BUT WILL NOT
IGNITE READILY.

Spill Release Procedures:STAY UPWIND & AWAY FROM SPILL. KEEP IGNITE
SOURCES FROM SPILL. FOR INDOORS, VENTILATE AREA. KEEP OUT OF
DRAINS/SEWERS/WATERWAYS. USE SAND-OTHER INERT MATERIAL TO DAM &
CONTAIN SPILL. DO NOT FLUSH AREA WITH WATER. CONTACT PROPER
AUTHORITIES.

Handling and Storage Precautions:KEEP TIGHTLY CLOSED, AWAY FROM IGNITE
SOURCES, IN A COOL, DRY PLACE. USE/STORE W/ADEQUATE VENT. "EMPTY"
CONTAINERS RETAIN RESIDUE & CAN BE DANGEROUS.
Other Precautions:DO NOT PRESSURIZE, CUT, WELD, BRAZE, SOLDER, DRILL,
GRIND OR EXPOSE SUCH CONTAINERS TO IGNITE SOURCES-MAY EXPLODE.
COMPLETELY DRAIN, PROPERLY BUNGE & PROMPTLY SHIP EMPTY "DRUMS" TO
SUPPLIER. AVOID INH ALATION OF VAPORS AND PERSONAL CONTACT.

Respiratory Protection:ADVISED WHEN CONCENTRATIONS EXCEED ESTABLISHED
EXPOSURE LIMITS. DEPENDING ON THE AIRBORNE CONCENTRATION, USE A
RESPIRATOR OR GAS MASK WITH APPROPRIATE CARTRIDGES AND CANNISTERS
(NIOSH APPROVED, IF AVA ILABLE) OR SUPPLIED AIR EQUIPMENT.
Ventilation:VENTILATION TO MAINTAIN AIRBORNE CONCENTRATION BELOW
EXPOSURE LIMITS. USE EXPLOSIVE PROOF EQUIPMENT WHERE NEEDED.
Protective Gloves:IMPERMEABLE GLOVES
Eye Protection:APPROVED EYE PROTECTION IS RECOMMENDED.
Work Hygienic Practices:PRACTICE GOOD PERSONAL HYGIENE.
Supplemental Safety and Health

Boiling Pt:B.P. Text:358F,181C
Vapor Pres:1.2 @ 68F
Vapor Density:2.5
Spec Gravity:1.42
Viscosity:82-110 KU
Evaporation Rate & Reference:0.17 (BUAC = 1)
Solubility in Water:INSOLUBLE
Appearance and Odor:PAINT, ODORLESS
Percent Volatiles by Volume:56.0

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:MAY GIVE OFF CARBON MONOXIDE WHEN BURNED.
Hazardous Decomposition Products:COMBUSTION MAY YIELD CARBON MONOXIDE
AND/OR CARBON DIOXIDE.

Waste Disposal Methods:DISPOSE OF PRODUCT IN ACCORDANCE WITH LOCAL,
COUNTY, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.